Carbonated beverage equipment and carbon dioxide mixed material directly through the pipeline into the liquid cylinder of the carbonated beverage filling machine, using the principle of constant pressure filling liquid level filling. In the production line of carbonated beverage equipment, the bottle enters the carbonated beverage filling machine (commonly known in the industry as three-in-one isopeptic filling machine) by the air channel sealing mouth under the action of wind, and then the bottle is rinsed, filled and sealed in turn. After block of semi-finished products by conveyor belt output, in turn, after inspection (human eye to detect the bottle inside presence of impurities, do a good job in every security defense), temperature bottle machine (material for the bottle temperature 3 ℃ temperature to room temperature, or air, heated bottle wall will produce a lot of dew, wet after packing boxes), blow drying machine (for then blow dry the water on the bottle), spurt the code machine production date (to play), label making machine (divided into a set of label and labeling, according to the bottle), packaging machine (divided into membrane charter flights and carton packaging machine, according to the actual situation and decide).
The carbonated beverage equipment is mainly composed of bottle holder, upper disk and guide rail. The bottle holder rotates with the upper disk, opens the bottle mouth by means of the shaped plate and holds the filling bottleneck. It turns 180 degrees according to the guide rail, rinses and drips, and then turns 180°.
Carbonated beverage equipment is mainly composed of water tank, filling valve, guide rail, bottle lifting device. The filling card plate no. 2 is fed into the filling machine. The filling card plate holds the bottleneck and rotates with the water tank. The bottle is sent to the filling machine with the no. 3 card plate.
The capping mechanism consists of three parts: the capping machine and the capping machine. The LIDS can be divided into ordinary LIDS and moving LIDS. This device can be used to seal two LIDS. The bottle is sent by the no.3 card plate, the card cover is completed, the cap is rotated and sent out by the no.4 card plate.